ACCUEIL

Consignes aux
auteurs et coordonnateurs
Nos règles d'éthique
Autres revues >>
International Journal of Forming Processes
1292-7775
Publication suspended
 

 ARTICLE VOL 7/4 - 2004  - pp.523-541  - doi:10.3166/ijfp.7.523-541
TITLE
Glass Strength in the Borehole Area of Annealed Float Glass and Tempered Float Glass

ABSTRACT
Thermal stresses of tempered glass in the area of typical boreholes were estimated using Narayanaswamy's structural relaxation model implemented in a Finite-Element-Code (ANSYS 5.5.2). Surface stresses were measured for samples with holes of different float glasses (soda-lime-silica-glass, borosilicate glass) from different commercial tempering processes. The bending strength in the borehole area of the samples and of annealed (float) glass samples was determined using a modified coaxial double-ring bending test. Results are compared and evaluated on a statistical basis. It is shown that the characteristic glass strength of tempered glass in the borehole area is not lower than in the "infinite area" given in European standards. From the results it is also assumed that crack healing plays an important role for the bending strength of tempered float glass.


AUTEUR(S)
Jens SCHNEIDER

KEYWORDS
glass strength, tempered glass, numerical modelling, tempering process, structural glass, photoelastic measurements.

CITATIONS
ijfp.revuesonline.com/revues/5/citation/5428.html

LANGUE DE L'ARTICLE
Anglais

 PRIX
• Abonné (hors accès direct) : 34.95 €
• Non abonné : 34.95 €
|
|
--> Tous les articles sont dans un format PDF protégé par tatouage 
   
ACCÉDER A L'ARTICLE COMPLET  (3,13 Mo)



Mot de passe oublié ?

ABONNEZ-VOUS !

CONTACTS
Comité de
rédaction
Conditions
générales de vente

 English version >> 
Lavoisier