ACCUEIL

Consignes aux
auteurs et coordonnateurs
Nos règles d'éthique
Autres revues >>
International Journal of Forming Processes
1292-7775
Publication suspended
 

 ARTICLE VOL 5/1 - 2002  - pp.53-70  - doi:10.3166/ijfp.5.53-70
TITLE
Transient Numerical Models of Metal Cutting using the Johnson-Cook's Rupture Criterion

ABSTRACT
This paper presents two-dimensional and three-dimensional transient numerical models of metal cutting. The simulations concern the study of the unsteady process of chip formation. These finite element models take into account dynamic effects, thermo-mechanical coupling with a rupture criterion and contact with friction. The yield stress takes into account the strain, the strain rate and the temperature in order to reflect realistic behavior in metal cutting. The rupture criterion adopted in the models presented here allows the definition of advanced simulations of the tool's penetration into the workpiece and of chip formation. The originality of such a criterion is that it is applied on all the workpiece and enables complex tool trajectories. Stress and temperature distributions, chip formation and tool forces are shown at different stages of the cutting process.


AUTEUR(S)
Jean-Louis BACARIA, Olivier DALVERNY, Olivier PANTALÉ, Roger RAKOTOMALALA

Reçu le 15 décembre 2000.    Accepté le 11 juin 2001.

KEYWORDS
Metal Cutting, Turning, Milling, Rupture Criterion, Finite Element Model.

LANGUE DE L'ARTICLE
Anglais

 PRIX
• Abonné (hors accès direct) : 34.95 €
• Non abonné : 34.95 €
|
|
--> Tous les articles sont dans un format PDF protégé par tatouage 
   
ACCÉDER A L'ARTICLE COMPLET  (8,73 Mo)



Mot de passe oublié ?

ABONNEZ-VOUS !

CONTACTS
Comité de
rédaction
Conditions
générales de vente

 English version >> 
made by WAW Lavoisier